Welding Industries Australia

1300 300 884

wle

Austmig 5183

Print Page

Precision layer wound aluminium wire alloyed with Mg, Mn and Cr.

  • Low Temperature
  • 5083 Type Material
  • MIG-MAG
  • GMAW
  • Flat Position - Fillet Joint
  • Flat Position - Butt Joint
  • Horizontal Position - Fillet Joint
  • Horizontal Position - Butt Joint
  • Vertical Position - Up
  • Overhead Position - Fillet Joint
  • Overhead Position - Butt Joint

Description

Precision layer wound aluminium wire alloyed with Mg, Mn and Cr. Double shaved for superb feedability. The Austmig 5183 can achieve higher tensile strength in the as welded condition of alloy 5083, which the filler alloy 5356 will generally fail.

Typical Applications

Recommended for welding 5083 type material in the annealed condition, particularly for low temperature applications where good ductility and toughness are required such as cryogenic plants and boat building.

Classification

  • AS/NZS ISO 18273 - S AI 5183
  • AWS A5.10: ER5183
Typical All Weld Metal Chemical Analysis     
SiFeCuMnMgCrZnTiAi
0.40.40.10.5 - 1.04.3 - 5.20.05 - 0.250.250.15Bal
Typical All Weld Metal Mechanical Analysis
Gas TypeYield StrengthTensile StrengthElongation
Ar110 MPa240 MPa17%
Wire Size (mm)Packet Size (kg)TypePart Number
1.26SpoolM518312S
1.66SpoolM518316S
Full Pallet Quantity 
Wire Size (mm)Weight (kg)
1.2 & 1.6504