Welding Industries Australia

1300 300 884

wle

Trailblazer 325

Print Page

NEW PETROL MODEL - NOW 49KG LIGHTER. NEW DIESEL MODEL - NOW 46KG LIGHTER.

  • Structural Steel Work
  • Sheet Metal
  • Repair
  • Rental
  • Pipe
  • Maintenance
  • Fabrication
  • Stick
  • MIG
  • Flux Cored
  • DC TIG Pulsed TIG GTAW-P
  • Air Plasma Cutting and Gouging with Optional Spectrum Models
  • Air Carbon Arc
  • Constant Current & Constant Voltage Weld Output
  • Direct Current Weld Output

Dual Generator System

One for welding and one for generating power - meaning no interaction between tools and the welding arc.

4-Pole 3 Phase Welding Generator

Utilises a 4-pole, 3-phase generator to produce the best welding arc.

Accu-Rated™ 12,000 Watts of Usable Peak Power

Separate 12,000 Watt single phase generator cranks out enough power for most applications.

Superior Arc Performance

  • Three Stick modes – XX10, XX18 and Gouge.
  • Two wire modes – Solid and Flux Cored.
  • Excellent MIG/FCAW arc performance.
  • Lift-Arc™ TIG with Auto-Crater™ and Auto-Stop™ and Pulse.

Auto-Speed™ Technology

  • Traditional high speed welder/generators always run at maximum speed (3600 RPM) while welding.  Auto-Speed technology automatically adjusts the engine speed to match your actual weld load requirements.
  • When more power is needed, the engine will automatically ramp up. By automatically varying the engine speed, fuel consumption and costs are reduced.

Innovative Design

For quieter operation, reduced size and weight and easier maintenance.

Super-Tough Protective Armour with Covers

High-impact resistance in all temperatures and is chemical-resistant.

Auxiliary Power (MR907510001-1)*

  • 2 X 15 Amp Sockets.
  • RCD.

* Generator auxiliary power is 60Hz, and intended for operating equipment associated with welding, such as angle grinders, drills  and floodlights.  Some Australian 50Hz equipment incorporating induction  motors, such as pumps, fans, air compressors, refrigeration or air-conditioners, may not operate correctly and could be damaged. Refer to appliance supplier or manufacturer to confirm suitability.

3 Year Warranty

Welder/generator is warranted by Miller for 3 years, parts and labour. For details, refer to the Miller warranty statement.
Engine is warranted separately by engine manufacturer.
 

Welding ModeProcessAmp/Volt RangeRated OutputGenerator PowerDimensions (mm)Weight (Without Fuel)

CC/DC
 

Stick/TIG

10 - 325 A
 

325 A at 28 V (Petrol),
325 A at 33 V (Diesel),
100% Duty Cycle

Peak:
12,000 Watts

Continuous:
10,500 Watts

240A, 60Hz

H: 711
H: 832 (to top of exhaust)
W: 508
D: 1029

209kg (Petrol model)
281kg (Diesel model)
CV/DCMIG/FCAW

10 - 325 V

325 A at 28 V (Petrol),
325 A at 33 V (Diesel),
100% Duty Cycle