Product Support
- Spec Sheets
- Miller Dynasty 210 Spec Sheet(341.77 KB)
Allows easy naming, saving and recalling of favorite weld settings.
Eliminates the guesswork when setting weld parameters.
Provides control of weld parameter ranges minimising deviation from the welding procedure specification (WPS).
Activate QuietPulse by selecting sine or triangular waveshape to reduce audible noise.
Allows for any input voltage hookup (120-480 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power.
Provides more consistent high-frequency (HF) arc starts and greater reliability compared to traditional arc starters.
Provides AC or DC arc initiation without the use of high frequency.
Front panel port provides the ability to easily update software, back-up settings and transfer saved weld programs from one unit to the next.
An integrated 120-volt dedicated-use receptacle for the Coolmate™ 1.3.
Operates the auxiliary cooling system only when needed, reducing noise, energy use, and airborne contaminants pulled through the cooler.
AC TIG
AC Waveforms
Independent amplitude/ amperage control allows EP and EN amperages to be set independently to precisely control heat input to the work and electrode.
DC TIG
Pulse Waveforms
QuietPulse™. Activate QuietPulse by selecting sine or triangular waveshape to reduce audible noise.
AC/DC STICK
Welding Mode | Input Power | Welding Amperage Range | Rated Output at 60% Duty Cycle | Amps 120V | Input 208V | Rated 240V | Load 400V | Output 480V | 50/60 KVA | Hz KW | Max. Open Circuit Voltage | Dimensions | Net Weight |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
TIG (GTAW) | 3 - Phase | 2-210A (AC) | 210A at 18.4V | – | 16 | 14 | 8 | 7 | 5.7 | 5.2 | 80 VDC (30 VDC) | H: 352mm W: 216mm D: 555mm | 21.3kg 22.7kg with CPS |
1 - Phase | 1-210A (DC) | 210A at 18.4V | – | 28 | 23 | 14 | 12 | 5.8 | 5.6 | ||||
1 - Phase (120V) | 2-150A (AC) 1-150A (DC) | 125A at 15V | 26 | – | – | – | – | 2.8 | 2.7 | ||||
Stick (SMAW) | 3 - Phase | 5-210A | 160A at 26.4V | – | 16 | 11 | 9 | 8 | 6.0 | 5.8 | |||
1 - Phase | 5-210A | 160A at 26.4V | – | 28 | 24 | 14 | 12 | 6.4 | 5.5 | ||||
1 - Phase (120V) | 5-100A | 90A at 23.6V | 27 | – | – | – | – | 2.9 | 2.8 |
Input Power | TIG (GTAW) Duty Cycle | Stick (SMAW) Duty Cycle | AC TIG Material Thickness | DC TIG Material Thickness | Stick Electrode Max. Diameter | Generator Requirement |
---|---|---|---|---|---|---|
208-480V | 310A, 60% | 210A, 30% | 0.3-6.4mm | 0.05-6.4mm | 4.8mm | 9 kW |
120V | 150A, 40% | 100A, 40% |