W64 Wire Feeder
4 Roll Drive Wire Feeder. For Consistent Wire Feed Control.
Suitable for the Weldmatic 396 and Fabricator, the W64-1 wire feeder provides the ultimate wire feeding capabilities. The 4 roll drive motor produces a consistent and strong drive for a variety of wires, while the low and high speed ranges allows for finer wire speed control. With added features including Arc start, creep, purge, latch, burn back and more, the W64-1 gives users the versatility to custom their settings to suit their wire feeding needs and preferences.
Heavy Duty Four Roll Wire Drive
With large and strong gears and ball bearings for extra reliability and performance.
Spot Timer, Post Gas, Pre Gas, Latch, Purge, Inch
Provides short weld times for repetitive spot welds
Continued gas flow after weld has finished
Allows gas to flow before weld starts
Stop/Start gun switch trigger. Reduces operator fatigue
Purges gas line without feeding wire
Feeds wire without wasting gas
Burnback
Controls how far the wire burns back to the tip on completion of the welding operation.
Specifications
Primary Voltage
32 Vac (from welding power source)
Rated Primary Current
5 Amps
Spool Sizes
5kg & 15kg
Wire Speed Range
0-172 RPM
0 - 10 metres per min low speed range
8 - 20 metres per min high speed range
Pre/Post Gas
Pre-gas range 0-2 seconds
Post-gas range 0-10 seconds
Spot Time
Yes, 0-2 seconds
Arc Start
Soft/Fast
Start Speed
Normal/Creep
Latch
2T/4T Modes
Weight
24.5kg
Resources
W64 Wire Feeder
4 Roll Drive Wire Feeder. For Consistent Wire Feed Control.
Suitable for the Weldmatic 396 and Fabricator, the W64-1 wire feeder provides the ultimate wire feeding capabilities. The 4 roll drive motor produces a consistent and strong drive for a variety of wires, while the low and high speed ranges allows for finer wire speed control. With added features including Arc start, creep, purge, latch, burn back and more, the W64-1 gives users the versatility to custom their settings to suit their wire feeding needs and preferences.
Specifications
Primary Voltage
32 Vac (from welding power source)
Rated Primary Current
5 Amps
Spool Sizes
5kg & 15kg
Wire Speed Range
0-172 RPM
0 - 10 metres per min low speed range
8 - 20 metres per min high speed range
Pre/Post Gas
Pre-gas range 0-2 seconds
Post-gas range 0-10 seconds
Spot Time
Yes, 0-2 seconds
Arc Start
Soft/Fast
Start Speed
Normal/Creep
Latch
2T/4T Modes
Weight
24.5kg