MigMatic® Feed 2.0
Suits MigMatic® MP400iP Power Source.
Unlock the full potential of the MigMatic® MP400iP with the MigMatic® Feed 2.0 Wire Feeder. Featuring smooth, accurate wire delivery and rugged industrial-grade construction, the MigMatic® Feed 2.0 is built to keep productivity high and downtime low, even in the toughest fabrication environments.
Applications
AEROSPACE
HEAVY FABRICATION
PRECISION FABRICATION
ALUMINIUM SHIP REPAIR
PIPE AND TUBE FABRICATION
RENTAL
SHIP BUILDING
CONSTRUCTION
MAINTENANCE & REPAIR
Multi-Process
MIG, Stick, TIG, Pulse MIG, Double Pulse MIG and Gouge with one unit. Lower equipment investment, less floor space requirements, and instant process switching for any job.
Single and Double Pulse Capability
Deliver TIG-like welds with MIG speed and efficiency, and achieve professional results that pass inspection without the time-intensive skills required for TIG welding.
Intuitive Digital Interface
Get new operators productive faster. Clear digital controls make setup simple for all skill levels, reducing training time and setup errors while delivering consistent quality across every shift.
100% Duty Cycle
Get 400A at a true 100% duty cycle, allowing continuous welding without cool-down interruptions. Dependable performance for high-volume, heavy-duty applications.
Full Synergic Pulse with Presets
Set up in seconds. Select the wire size and gas type and the machine auto-configures everything. Pre-programmed combinations eliminate guesswork. Reduced setup time, consistent results, minimal training needed.
Trigger Program Switch
Recall up to four preset programs directly from the torch trigger using any standard MIG torch, increasing productivity on complex jobs.
Miller Robustness
IP23S tested and approved for heavy duty welding under the toughest conditions. Miller goes to extreme lengths to ensure reliable performance in virtually any environment.
Energy Efficient
The Fan-On-Demandâ„¢ power source cooling system operates only when needed, minimising the amount of contaminants pulled through the machine while also reducing noise and overall energy use.
Push/Pull Compatible
Work with greater reach, flexibility and convenience with full push pull capability. The MigMatic® Push Pull MIG Gun Kit (P/N:KIT0009) pairs seamlessly with the MigMatic® MP400iP for consistent wire feeding wherever the job takes you.
Specifications
Input Power
42 VAC, 1Ph
(50/60Hz)
Welding Power Source
MP 400iP
Wire Feed Speed
1.5-2.0m/min
Wire Diameter Range
0.6-1.6mm
Welding Circuit Rating
39V, 500A, 60% Duty Cycle
Dimensions (DxWxH)
710 x 275 x 465mm
Weight
18kg
Welding Specifications
MIG Welding
Current Range
15-400 Amps
Duty Cycle @40°C
100% @ 400A, 34V
Wire Size Range
0.6-1.6mm
Wire Spool Size
5kg (D200)
15kg (D300)
Stick Welding
Current Range
15-400 Amps
Duty Cycle @40°C
100% @ 400A, 36V
Electrode Size Range
1.6-6.4mm
TIG Welding
Current Range
15-400 Amps
Duty Cycle @40°C
100% @ 400A, 26V
Material Thickness Range
DC 0.1-10mm Single Pass
Air Carbon Arc Gouging
Current Range
15-400 Amps
Electrode Size
10mm
Resources
Reviews (0)
There are no reviews yet.
MigMatic® Feed 2.0
Suits MigMatic® MP400iP Power Source.
Unlock the full potential of the MigMatic® MP400iP with the MigMatic® Feed 2.0 Wire Feeder. Featuring smooth, accurate wire delivery and rugged industrial-grade construction, the MigMatic® Feed 2.0 is built to keep productivity high and downtime low, even in the toughest fabrication environments.
Applications
AEROSPACE
HEAVY FABRICATION
PRECISION FABRICATION
ALUMINIUM SHIP REPAIR
PIPE AND TUBE FABRICATION
RENTAL
SHIP BUILDING
CONSTRUCTION
MAINTENANCE & REPAIR
Specifications
Input Power
42 VAC, 1Ph (50/60Hz)
Welding Power Source
MP 400iP
Wire Feed Speed
1.5-2.0m/min
Wire Diameter Range
0.6-1.6mm
Welding Circuit Rating
39V, 500A, 60% Duty Cycle
Dimensions (DxWxH)
710 x 275 x 465mm
Weight
18kg
Welding Specifications
MIG Welding
Current Range
15-400 Amps
Duty Cycle @40°C
100% @ 400A, 34V
Wire Size Range
0.6-1.6mm
Wire Spool Size
5kg (D200)
15kg (D300)
Stick Welding
Current Range
15-400 Amps
Duty Cycle @40°C
100% @ 400A, 36V
Electrode Size Range
1.6-6.4mm
TIG Welding
Current Range
15-400 Amps
Duty Cycle @40°C
100% @ 400A, 26V
Material Thickness Range
DC 0.1-10mm Single Pass
Air Carbon Arc Gouging
Current Range
15-400 Amps
Electrode Size
10mm
Resources
Reviews (0)
There are no reviews yet.