ArcReach 16 Wire Feeder
For Superior Wire Feed Speed Accuracy & Consistency
The ArcReach® 16 wire feeder model is equipped with a simple interface that allows operators to adjust parameters at the point of use with no control cords. Switch between welding and gouging with a push of a button with no need to swap leads or disconnect. It can also handle large-diameter wire (2.4mm).
Applications
CONSTRUCTION
SHIPBUILDING
HEAVY MANUFACTURINGÂ
MINING
MRO - MAINTENANCE/REPAIR
Easy Process ChangeoverÂ
Simply connect the ArcReach 16 wire feeder to your weld lead and you are ready to go. Switch between welding and gouging with a push of a button with no need to swap leads or disconnect the wire feeder with isolated outputs.
Weld With up to 27kg Spools
Weld with up to 27kg spools and large 2.4mm wire diameter to minimise downtime and maximise productivity.
Durable Design Reduces Downtime
The elimination of feeder control cords and field assembly IP23 rating provides a solid solution to last in harsh environments.
Sets the Standard for Performance
Heavy-duty drive motor with tachometer control provides wire feed speed that is accurate and consistent from the start of the weld to the finish and from one weld to the next, providing consistent arc quality. Wide voltage range for small and large wires with no contactor chatter or arc outages.
Integrated Gouging Stud on Wire Feeder
Isolated gouging stud allows easy connection for gouging at point of use, eliminating the need to disconnect the wire feeder and to swap leads.
Specifications
Input Power
3 Phase
Input Welding Circuit Rating
450A at 100% Duty CycleÂ
500A at 60% Duty CycleÂ
CAC-A 600A at 40% Duty Cycle
Wire Feed Speed
50-780 IPM (1.3-19.8m/min) dependent on arc voltage
Wire Type and Diameter Capacity
Solid WireÂ
0.9-1.9 mmÂ
Flux-CoredÂ
1.1-2.4 mm
Max. Spool Size Capacity
457 mmÂ
27.2 kg
Dimensions (mm)
Base FeederÂ
H: 388 mm W: 424 mm D: 833 mmÂ
Shop CartÂ
H: 508 mm W: 632 mm D: 922 mmÂ
Field Roller
H: 716 mm W: 505 mm D: 1,084 mm
Weight
Base FeederÂ
45.8 kgÂ
Shop CartÂ
54.4 kgÂ
Field RollerÂ
55.7 kg
Resources
ArcReach 16 Wire Feeder
For Superior Wire Feed Speed Accuracy & Consistency
The ArcReach® 16 wire feeder model is equipped with a simple interface that allows operators to adjust parameters at the point of use with no control cords. Switch between welding and gouging with a push of a button with no need to swap leads or disconnect. It can also handle large-diameter wire (2.4mm).
Applications
CONSTRUCTION
SHIPBUILDING
HEAVY MANUFACTURING
MINING
MRO - MAINTENANCE/REPAIR
Specifications
Input Power
3 Phase
Input Welding Circuit Rating
450A at 100% Duty CycleÂ
500A at 60% Duty CycleÂ
CAC-A 600A at 40% Duty Cycle
Wire Feed Speed
50-780 IPM (1.3-19.8m/min) dependent on arc voltage
Wire Type and Diameter Capacity
Solid Wire 0.9-1.9 mmÂ
Flux-Cored 1.1-2.4 mm
Max. Spool Size Capacity
457 mmÂ
27.2 kg
Dimensions (mm)
Base Feeder -  H: 388 mm W: 424 mm D: 833 mmÂ
Shop Cart - H: 508 mm W: 632 mm D: 922 mmÂ
Field Roller - H: 716 mm W: 505 mm D: 1,084 mm
Weight
Base Feeder 45.8 kgÂ
Shop Cart 54.4 kgÂ
Field Roller 55.7 kg