- Stainless Steel Fabrication
- Repair and Maintenance
- Motor Sports Fabrication
- Food and Wine
Get quality results with the Weldarc 200 DC Stick/TIG welder. For intermediate to welding professionals, HF Start and Pulse TIG capabilities provide easy non-contact arc starting and allows greater heat control of the weld pool, increases weld penetration and speed providing high quality weld results. Plus, it supports foot control adjustment for enhanced control capabilities.
Built with quality components and manufactured with 3 years warranty, the Weldarc 200 DC is an easy choice for welders looking for a well-priced professional grade Stick/TIG welder that doesn’t compromise on results.
Due to variation between generators by different manufacturers, it is impossible for WIA to validate operation from all generators.
15 Amp Plug
Voltage Reduction Device
Provides extra protection in harsh environmens.
Prevents the machine from operating beyond its safe thermal zone.
Weighing only 12kg, the Weldarc 200 DC can go where you go.
Reduces noise, energy use and contaminates.
For easy non-contact arc starting. Increases tungsten life. Reduces weld inclusions.
For greater heat control. Increases weld penetration, speed and quality.
Smooths out the actual input current. Maximises efficiency when welding on long leads or from generators.
Primary Voltage | Rated Primary Current | Max. Primary Current | Recommended Generator KVA | Supply Plug | IP Rating | Weight | Standards Compliance |
---|---|---|---|---|---|---|---|
240 VAC – 50/60 Hz | 11 Amps | 20 Amps | 10 kVA | 15 Amp | IP21S | 17kg | AS60974.1 & AS1674.2 (VRD) |
Output Range | Rated Output @ 40°C (10min) |
---|---|
10A/20.4V-160A/26.4V | 160A/26.4V @30% |
Output Range | Rated Output @ 40°C (10min) | Material Thickness Range |
---|---|---|
AC:15A/10.6V-200A/18V | 200A/18V @30% | Welds up to 8mm steel or aluminium plate, single pass |