Product Support
- Spec Sheets
- XMT 450 Spec Sheet(363.37 KB)
Protects electrical components and PC boards from contamination.
The cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled through machine.
Allows TIG starting without the use of high-frequency. Starts the arc without contaminating the weld with tungsten.
Increases the output Amperage at the start of a weld if necessary, eliminating electrode sticking.
Offers heavy-duty protection with the benefit of reduced weight.
Easy to view and can be pre-set.
Provides greater puddle control for superior 6010 Stick electrode performance, and outstanding MIG weld performance.
Reduces the number of control setup combinations without reducing any features.
With optional Optima™ control reduces spatter and distortion, allows better out-of-position puddle control, and provides potential reduction of fume particle emission.
Keeps welding output constant even if input power varies by ±10%.
For details, refer to the Miller warranty statement.
Input Power | Rated Output | Voltage Range - CV Mode | Amperage Range in CC Mode | Amps Input at Rated Load Output, 60Hz | Dimensions (mm) | Weight | |||
---|---|---|---|---|---|---|---|---|---|
400V 3 Phase | KVA | KW | |||||||
3 Phase | 450 A at 38 VDC, 100% Duty Cycle | 10 – 38 V | 15 – 600 A | 27.6 | 22 | 18.9 | H: 438 W: 368 D: 689 | 55.3 kg |