Welding Industries Australia

1300 300 884

wle

PipeWorx Welding System

Print Page

DESIGNED & OPTIMISED FOR PIPE FABRICATION SHOPS.

  • Refinery
  • Process Piping
  • Power
  • Petro Chemical
  • HVAC and Water Pipe
  • Stick
  • Pulsed MIG
  • MIG RMD
  • MIG
  • Flux Cored
  • DC TIG
  • Constant Current & Constant Voltage Weld Output
  • Direct Current Weld Output
  • Three Phase Input Power

Single System Design

One machine designed to perform all your pipe welding needs.

Wind Tunnel Technology™

Protects electrical components and PC boards from contamination.

Fan-On-Demand™

The cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled through machine.

Multi-Process Machine

  • Weld processes are optimised to deliver superior arc performance and stability specifically for root pass, fill and cap pipe welding.
  • Includes conventional Stick, DC TIG (Lift-Arc or HF Start), Flux Cored and MIG welding processes.
  • Advanced RMD® and Pulsed MIG processes deliver superior quality welds, increase productivity, and reduce rework and training.

Streamlined System

  • Wind Tunnel Technology™ and Fan-On-Demand™ provide system protection in the dusty shop environment.
  • Innovative cable and gun storage manages clutter for a cleaner, organized weld-cell area. Cables remain connected to the power source and do not need to be switched for the different welding processes.
  • All system components have been selected to meet the needs of a pipe fabrication shop.

Simple Process Set-Up

  • Clearly labelled controls in easy-to-understand welder terminology.
  • Requires just a few basic steps to set up a new weld process, resulting in less training time and less errors from incorrect setups.
  • The front panel was designed by welders for welders. Only backlit controls are adjustable to eliminate confusion.
  • Memory feature stores four programs for each selection: Stick, DC TIG, and MIG (left and right side of feeder). Beneficial when using multiple procedures, multiple process parameters or multiple welders and eliminates the need to remember parameters.

Quick Process Changeover

  • No need to manually switch polarity or cables and hoses between processes. Simply push a process selection button to choose a welding process. PipeWorx ‘Quick-Select’ technology automatically selects the welding process, the correct polarity, cable outputs and welding parameters.
  • Quick process changeover eliminates set-up time for switching cables and gas hoses. Also, reduces the risk of weld reworks due to incorrect cable connection.

Single or Dual Wirefeeder Available

With simple operator interface. Wirefeed speeds up to 780 IPM.

3 Year Warranty

For details, refer to the Miller warranty statement.
 

Welding ModeRated OutputAmp Voltage RangeAmps Input at Rated
Load Output,  50/60 Hz
KVA (400 V)KW (400 V)Dimensions (mm)Weight
   400V
3 Phase
    
CC: Stick350 A at 36
VDC, 100%
Duty Cycle
40 – 350 A25.517.816.5H: 711
W: 495
D: 806
(Power Source only)
102kg
(Power Source only)
CC: DC TIG350 A at 24
VDC, 100%
Duty Cycle
10 – 350 A18.112.59.8
CV: MIG/Flux Cored400 A at 34
VDC, 100%
Duty Cycle
10 – 44 V25.718.015.6